Differences

This shows you the differences between two versions of the page.

--- software:rstudio [2025-03-24 18:28] – [Start RStudio Server in Singularity Container] anita
+++ software:rstudio [2025-03-24 18:40] (current) – [Access RStudio Interface] anita
@@ Line 41: / Line 41: @@
 </note>
 === Linux/MacOS ===
-If you are using Linux or MacOS, open the terminal on your laptop and type
+If you are using Linux or MacOS, open the terminal on your laptop or desktop computer, and type
 <code bash>
 ssh -L 8787:r1n17:8787 traine@darwin.hpc.udel.edu
 </code>
-be sure to replace ''traine'' with your actual username, and substitute ''r1n17'' with the compute node where your interactive job is running and you started the ''rserver'' in the previous step. You will need to log in using your DARWIN credentials in this terminal. If you are doing this on Caviness, then you would use the same command but replace ''darwin.hpc.udel.edu'' with ''caviness.hpc.udel.edu''.
+be sure to replace ''traine'' with your actual username, and substitute ''r1n17'' with the compute node name where your interactive job is running and where you started ''rserver'' in the previous step. You will need to log in using your DARWIN credentials in this terminal. If you are doing this on Caviness, then you would use the same command but replace ''darwin.hpc.udel.edu'' with ''caviness.hpc.udel.edu''.
 === Windows ===
@@ Line 52: / Line 52: @@
 {{:software:rstudio-putty-1.png?400|}}
-If you are doing this on Caviness, then you would use ''caviness.hpc.udel.edu'' instead of ''darwin.hpc.udel.edu''. In addition to your standard connection settings, you'll need to set up an SSH tunnel. To do this, navigate to **Connection → SSH → Tunnels** in PuTTY. Then, add the **Source Port** to ''8787'' and the **Destination** to ''r1n17:8787'' (remember to replace ''r1n17'' with the compute node where your interactive job is running and you started the ''rserver'' in the previous step).
+If you are doing this on Caviness, then you would use ''caviness.hpc.udel.edu'' instead of ''darwin.hpc.udel.edu''. In addition to your standard connection settings, you'll need to set up an SSH tunnel. To do this, navigate to **Connection → SSH → Tunnels** in PuTTY. Then, add the **Source Port** to ''8787'' and the **Destination** to ''r1n17:8787'' (remember to replace ''r1n17'' with the compute node name where your interactive job is running and where you started ''rserver'' in the previous step).
 {{:software:rstudio-putty-2.png?400|}}
-Click **Add** to confirm the tunnel settings, then click **Open** to connect. You will be prompted to enter your username and password for your DARWIN (or Caviness) account.
+Click **Add** to confirm the tunnel settings, then click **Open** to connect. You will be prompted to enter your username and password for your DARWIN (or Caviness) account depending on which hostname you used in the previous step.
 {{:software:rstudio-putty-3.png?400|}}
 ==== Access RStudio Interface ====
-Once SSH tunnel connection is open, then open a web browser and navigate to the following URL
+Once SSH tunnel connection is established, then open a web browser on your laptop or desktop computer and navigate to the following URL
 <code>
 localhost:8787
 </code>
-You should see the RStudio session start. Once you have completed your work, exit the RStudio session by closing the browser, close the SSH tunnel, and stop the ''rserver' on the compute node, and type ''exit'' to end the interactive job.
+You should see the RStudio session start. Once you have completed your work, exit the RStudio session by closing the browser, close the SSH tunnel terminal, stop the ''rserver'' on the compute node with ''CTRL-C'', and then type ''exit'' to end the interactive job.